SEMA 2009: Ford shows off '34 with an EcoBoost V6

Hot rods with modern engines is nothing new, but this has got to be the first one that sports an EcoBoost V6. Detroit Street Rods managed to squeeze the 3.5L EcoBoost V6 under the hood of this 1934 Ford, and it packs a mighty punch with 400hp 400 lb-ft of torque.

Ford gets extra credit for incorporating this modern engine with a retro hot rod in a retro looking engine bay. The dual Honeywell turbochargers have been moved to the front of the motor among various aluminum tubing routing air and exhaust gases, and a single, large exhaust cone exits above the front fender on each side of the car.

PRESS RELEASE

DEARBORN, Mich., Oct. 28, 2009 – Hot rodders have always lived by the motto "There's no replacement for displacement," indicating that the more cubic inches an engine has, the better the resulting performance. Ford Powertrain and Detroit Street Rods are out to prove that thinking out-of-date with their EcoBoost™-powered '34 Ford hot rod.

To be introduced at this year's Specialty Equipment Market Association (SEMA) show, the Ford hot rod will be the "first" rear-wheel-drive application of the 3.5-liter twin-turbo EcoBoost V-6 delivering an estimated 400 horsepower and 400 ft.-lb. of torque – power numbers that easily rival a typical hot rod's 302-cubic-inch V-8 or even a modern-day V-8 of similar size.

"EcoBoost technology shows that there is a viable replacement for displacement," said Dan Kapp, director of Ford Powertrain Research and Advanced Engineering, who will be part of a SEMA "Driving Green" technology briefing panel discussion during the show. "As consumers' demand for fuel efficiency continues to grow, and our commitment to delivering best-in-class fuel economy remains steadfast, it's important to show that performance does not need to suffer as a result."

"Hot rod builds provide blank canvases for SEMA member companies and SEMA is uniquely positioned to demonstrate that horsepower and green power can coexist without sacrificing performance or the cool factor," said John Waraniak, SEMA vice president of Vehicle Technology. "This '34 EcoBoost hot rod is a fantastic example of modern green technology being applied in a manner that any performance enthusiast would love."

The EcoBoost family of engines uses turbocharging and direct injection technology to deliver up to 20 percent better fuel economy and up to 15 percent fewer CO2 emissions versus larger-displacement engines.

"The beauty of EcoBoost is that it enables us to downsize for fuel efficiency, yet boost for power," said Kapp. "We're able to decrease the size of the available engine – such as installing a V-6 versus a V-8 – yet boost the power using turbocharging to deliver similar power and torque to that larger engine."

The first EcoBoost engine, a 3.5-liter twin-turbo V-6, launched this year on the 2010 Ford Taurus SHO and Flex and on the Lincoln MKS and Lincoln MKT. The EcoBoost V-6 produces 355 horsepower (365 hp in the Taurus SHO) and 350 ft.-lb. of torque.

Ford has recently announced the first four-cylinder EcoBoost engines, launching in global applications beginning next year. The 1.6-liter EcoBoost I-4 first arrives in Europe, followed by the 2.0-liter EcoBoost I-4 launching on products in both Europe and North America.

Going forward, Ford will shift its powertrain strategy to be built around EcoBoost technology. Under the new system:

* A 3.5-liter EcoBoost V-6 would replace naturally aspirated V-8 engines
* A 2.0-liter EcoBoost I-4 would replace naturally aspirated V-6 engines
* A 1.6-liter EcoBoost I-4 would replace naturally aspirated large I-4 engines

Following the launches of the new EcoBoost I-4s will be the extension of the 3.5-liter V-6 to the first rear-wheel-drive configuration in the F-150 pickup truck late next year. Another global application, the Ford Falcon sedan in Australia, will receive a rear-wheel-drive version of the 2.0-liter EcoBoost I-4 in 2011.

The fun-to-drive nature of EcoBoost engines is leading Ford to introduce these fuel-saving powertrains in large volumes virtually across its lineup. For example, by 2013 more than 90 percent of Ford's North American lineup will be available with EcoBoost technology, and nearly 80 percent of Ford's global nameplates will have an available EcoBoost option.

By 2013, global EcoBoost volume throughout the Ford, Lincoln and Mercury vehicle family is expected to be 1.3 million units, with up to 750,000 sales coming from North America alone.

'34 Ford EcoBoost hot rod project
Detroit Street Rods' latest build is a 1934 Ford and is a joint venture with Ford Motor Company and Experi-metal. In this '34 application, the EcoBoost engine is configured for rear-wheel drive and is coupled with a Tremec five-speed manual transmission.

"The decision to use the EcoBoost engine for our powertrain on this project was an easy one in that it gave us the opportunity to combine the iconic '34 Ford sculpted body lines with the advanced technology of the EcoBoost powerplant," stated Robert Smith, president of Detroit Street Rods. "The result is the perfect hot rod marriage of advanced technology for power and legendary automobile design."

While the stock Honeywell turbochargers that drive the EcoBoost engine are used, they were repackaged to fit the engine bay of this all-steel replica body. The engine configuration and turbocharger packaging was dynamometer tested by Ford Powertrain for proper calibration of the engine electronic control module (ECM). In addition to the all-stock engine, other components including the fuel pump, ECM, fuel pump module, fuel pump processor and drive-by-wire throttle were utilized in their original production configuration.

The body is from Steve's Auto Restoration and is the recently released 1934 Ford 3-Window coupe. The complete body and fenders are from brand-new tooling, and are designed, stamped and manufactured by Experi-metal in Sterling Heights, Mich. This "replica" '34 features all-steel construction, full fenders, running boards, electronic power windows, air conditioning and custom bumpers.

The engine was repackaged and fitted with an engine plate adapter to mate with an aluminum flywheel, performance clutch and a Tremec TKO five-speed transmission. The turbochargers were repositioned to the front of the cylinder heads and custom aluminum tubing was used to route the air from the custom air cleaner through the air-to-air intercooler. The exhaust gases are routed from the cylinder heads through coated headers, through the stock wastegates, and pass through large custom exhaust cones located outside the engine bay and just above the front fenders.

Ford's EcoBoost shines at the dragstrip

Car and Driver, among others, recently got to try out the future of Ford's powertrains at the dragstrip. The Ford Flex EcoBoost and Lincoln MKS EcoBoost got out to make some passes at Milan Raceway in Milan, Michigan a few weeks back.

Both the MKS and the Flex sported a 3.5 liter powertrain rated at 355hp, thanks to some turbocharged power. It's so surprise then that neither proved to be a slouch, with the MKS running the quarter in 13.9 seconds at 104 mph and the Flex netting a time of 14.5 seconds at 98 mph.

Their performance is certainly a great indicator of future potential, as neither car is your typical drag racer. Just wait until these things get dropped in a Mustang, and the aftermarket gets ahold of them and starts cranking out aftermarket parts.

News concerning Ford's future engines, including the 5.0!

PickupTrucks.com is reporting that by the end of 2010, Ford will alter the three engine options that currently make up the engine choices in the F-150. What is coming in time for the 2011 model year will be a new 3.5-liter EcoBoost V6 and a 5.0-liter V8 code-named "Coyote."



Subbing the V6 EcoBoost for the V8 is about providing the same power with more efficiency. Said to be the premium engine for light-duty trucks, the direct-injection gas engine will offer something like 400 horsepower and 400 pound-feet of torque while carrying an EPA rating of "at least 23 miles-per-gallon on the highway." Those power numbers handily beat what you'll get from any of the current engines on offer, even though it's down two cylinders.



The "Coyote" 5.0-liter, modular, four-valve V8 will have "huge heads," and will return the same numbers as the V6: 400 hp and 400 lb-ft. This engine will become the standard F-150 lump, returning the same gas mileage as the current 5.4-liter but with much more power. This same engine will also reportedly find its way into the Mustang. That will leave the 6.2-liter V8 (the Boss) slated for the Raptor later this year as last engine choice (unless there's a 4-cylinder EcoBoost added in 2013), and it will go into special edition F-150s and the Super Duty trucks.



[Source: PickupTrucks.com]